'Klarit' anti - mist treatment from MILLBRIDE Products (2)

can be used in a very wide range of situations ...

where the temperature fluctuates ( moving from indoors to outdoors or vica versa.)
in humid conditions ( over hot tanks, power station, catering, greenhouses etc.)
on goggles in 'sweaty' conditions.
in harmful conditions (pouring chemicals etc.)
on face masks and respiratory equipment.
on windows, mirrors and interior car windows
on personal spectacles and fine lenses.
on motor cycle visors.
for winter sports
for DIY and gardening
for security services.

An effective problem solver...

How many managers find difficulty in getting operatives to apply safety procedures ?
Why don't operators use eye protection, in dangerous conditions - perhaps because they use face masks and work in conditions that are confined, cool or humid ?
Eye wear mists up! They cannot see! Arguments ensue!
A worker could be permanently injured, the inconvenience to your company is obvious.

The Answer -

A single application of Klarit can last the full duration of a shift (under normal factory conditions.)
The pocket-size, 'wind up' dispenser allows each user to be issued with their own unit. 'Down time' can be minimized as re-application is often unnecessary.

Sorry, your browser doesn't suppor Java.

The Klarit stick is a 'personal' unit for operatives to use at their point of work, ideal for 'itinerant' workers. This obviates the need, in many circumstances for visits to cleaning stations.

Too often staff are frustrated by repeatedly misting eye protection and remove protectors completely, exposing themselves to potential injury and the company to litigation. On-the-job eye injuries still send too many people to hospital each year. The need for effective treatment is clear!

Better than previous alternatives...

By comparison, many alternative products are centrally dispensed and, at best, are effective for only a few hours at a time. This forces users to stop work and return to the dispenser station several times per shift for re-applications. Klarit often saves this downtime and on the consequent loss in production.

Cost Effective...

Each Klarit stick will treat a typical pair of goggles, every day for approximately six months so the cost is potentially less than 2p per day ! Savings can be made on the purchase/replacement of more expensive anti - mist goggles. With quantity discounts, expense is further reduced.

ORDER NOW - QUICK, SIMPLE and SECURE

Klarit is normally sold in multiples of ten units. Introductory orders are accepted only with full payment by cheque or credit card, thereafter alternative settlements can be arranged.


	TOP

The best introduction...

is for you to try Klarit yourself! We hope you and others interested in safety and working effectiveness will test it on a range of goggles and glasses.

Industrial Users and Distributors normally buy Klarit in boxes of ten, however an evaluation pack is available for £5.

Private individuals can purchase in singles or multiples, please contact us about cost.

We feel sure you will find that Klarit meets your highest expectations, and proves a valuable safety asset.

Technical Data

Product :	Klarit Anti-Mist Stick.


Form :	White cylindrical wax-like bar in lip-salve form dispenser.


Unit Size :	19 mm dia. by 69 mm long.


Standard Packaging :	Box of ten units, 195x73x21 mm.


Storage :	Normal dry storage away from heat, no odour.


Safety data :	Non hazardous, non toxic, no special considerations.


Typical Usage :	Up to 6 months of daily use on standard safety goggles.


Application Efficacy :	Normal humidity/humidity changes - several days intense conditions - various, rarely less than 8 hours.


Shelf Life :	At least three years in temperate climates.

How to apply ...

A small stroke of the applicator is applied to both sides of a lense, not applying too much pressure. Buff the treatment with a clean cotton cloth, ensuring it is spread over the lense. Do not rub too hard or the treatment will be removed. For larger areas such as a visor, increase the number of strokes. Slightly dampening the cloth helps the spreading process on large areas ( such as internal windows of vehicles ) Using too much Klarit makes polishing the lenses clear difficult and necessitates hard rubbing. This may remove the treatment altogether. In particularly adverse conditions we suggest using more than one application, rather than attempting to apply one thick coating.

How to apply ...

A small stroke of the applicator is applied to both sides of a lense, not applying too much pressure. Buff the treatment with a clean cotton cloth, ensuring it is spread over the lense. Do not rub too hard or the treatment will be removed.

For larger areas such as a visor, increase the number of strokes. Slightly dampening the cloth helps the spreading process on large areas ( such as internal windows of vehicles )

Using too much Klarit makes polishing the lenses clear difficult and necessitates hard rubbing. This may remove the treatment altogether. In particularly adverse conditions we suggest using more than one application, rather than attempting to apply one thick coating.

Notes for Distributors / Re-sellers
you will find Klarit promoted extensively within the motorcycle market. you will find Klarit an easy size to stock. you will find Klarit requires no special stock handling or regulations. you will find Klarit has a long shelf life and is easy to distribute. you will find Klarit offers good margins - you could make serious money !

Brian Miller,
General Manager

Millbride Products Ltd.
67 Fountain Road
Birmingham
B17 8NP.
United Kingdom

Fax: +44 (0)121 429 3231

	Please Email Us for more details. ORDER NOW - QUICK, SIMPLE and SECURE


	HOME	TOP