OK, let's go over to the shop and take a look at some projects I've done and some (newly burnt) stuff. There's a 1948 Ford 8N tractor I rebuilt a few years back (no burn, but close). Over there's a van that I did a complete makeover on. It was white and pretty rough so I put the "Bondo" touch on it and put a new interior in. I built it for me but some guy made me an offer I couldn't refuse. Let's go into the shop.
Here's my 1980 Sporster project that I built (now toast) as a little curve burner. I ground down the welds and ugly bits from the frame, molded it and shot it blood red. Recognize that paint? I added some hardener to the extra van paint and it looks (looked) good. I set it up on blocks here to check the alignment. Here's a shot with a 4.2 gallon XLH "turtle" tank. Here's some more shots with a stock tank for testing the engine and wiring out. Front angle and rear angle gives you a look at the polished cases and stainless steel button heads everywhere. Well crap, here's a shot of it after the fire. Ouch!
Here's a shot of one of the RT's that was setting too close to the shop! And here's my (fried) boat. One last shot of the remains I had to pull out of the shop. It's kinda artsy looking if you're sadistic.
Some vintage BMW pix taken at the '04 Mid Ohio Vintage Days.
Have a Question?