H LLOYD CYCLES Speciality Parts and Accessories
For those of you who are undertaking bicycle renovation, or are in need of parts that are difficult to find in your local cycle shop this is the place for you ! The parts listed below are often difficult to find, but are normally in stock and available off the shelf from H Lloyd Cycles. You can run right through the list, or use the navigation short-cuts below. All parts are priced in £ Sterling with pack and freight details included TO UK ADDRESS. For export please use the "how to order" button below. Short Cuts
Tyres	Benelux Gears	Nuts, bolts, Washers and Screws	Taps & Dies	Cyclo Parts
	Lining Tools	Cycling clocks !	Special Detail Parts

Benelux spares and repairs.

After many years of collecting together Benelux spares we can now supply spares, recondition or even supply new Benelux front and rear mechs and down-tube levers. This applies to Mk7, Mk12, "tourist", P2 and Super 60 gears. As it’s not possible to supply EVERYTHING it’s best to phone to discuss what’s required. Exploded diagrams can be supplied for all these gears for a small fee. There are some notable exceptions to the help that can be provided. Specifically front mech cages are not available, all rod-operated front mech spares are unobtainable, and P2’s and Super 60’s can not normally be supplied new. We will not release metal jockey wheels either as they’re needed for full rebuilds and "build from new".

Return to index

Cyclo Parts

CYCLO NEWS

Cyclo ceased trading in January 2000 after 70-odd years of making parts for the Cycle trade. As a result, many of the items in the Cyclo section of Lloyds' list will become more and more difficult to find. We are already running out of fixed wheel sprockets, although other items are relatively well stocked. Don't expect these parts to be available for ever though !

	Price	P & P
Pump pegs, screw on bright chrome. Per pair	£2.50	£0.25
Saddle bag loops, bolt onto saddle frame. Bright chrome. Pair	£3.00	£0.25
Cable clips, screw over cable and tube. Chrome, per set three	£2.50	£0.25
Crank shorteners. Pair	£7.00	£1.50
Fixed sprockets. 13T - 22T. 1/8" or 3/32". Each	£6.00	£0.50
Fixed wheel LH thread lock-rings. Each	£1.75	£0.25

Return to index

LINING TOOLS

	Price	P & P
Top Quality Beugler tools imported from the States. Not that difficult to use with a little practice. Ideal for frames, mudguards, rims etc. Price reflects the quality, and in any case is cheaper than buying lots of lining transfers if you have a number of projects to complete. Boxed kit including three wheels (to choice).	£92.00	£6.00
Gold enamel by One-Shot. Ideal for above, or for lettering.	£12.00	£2.00
Other enamel colours (Phone for details)	£8.00	£2.00

Return to index

Understanding nuts, bolts, washers and srews.

OK, some clever-dick will trip us up on this, but it’s important to understand "fastener" terminology. Those long things with a thread running down them are NOT "bolts". Terminology used in the fastener list is as follows :-

HEXNUTS are those six-sided things.

LOCKNUTS are "thin" hex nuts. Used to help lock two nuts together.

SETSCREWS (and machine screws) have a thread all the way from head, to the end. Technically "bolts" are not threaded all the way.

SOCKETSCREWS have a thread all the way too, the difference being that the head has a hex HOLE in it to use with an allen key of the right size.

ROUNDHEAD setscrews are domed, non-countersunk and use a conventional slotted screwdriver.

CHEESEHEAD setscrews also use a conventional slotted screwdriver, but they have a round, flat top.

PANHEAD setscrews are like a cheesehead, but the whole head is a bit bigger and "flatter" than a Cheesehead.

CAPHEAD socket screws also have a (slightly deeper) round, flat top but you use an allen key rather than a screwdriver to turn it.

BUTTONHEAD socket screws are like a roundhead, but you use an allen key rather than a screwdriver to turn it. They provide a very neat finish, but are generally a bit more expensive to produce.

NYLOK nuts have a nylon insert to help them stop turning, and therefore coming lose on the socket/setscrew. They cannot be turned by hand, so all the thread needs to be taken up using a spanner.

BZP means "bright zinc plate". These give a non-fancy, plated finish, but will develop a "bloom" and ultimately rust if not looked after.

STAINLESS means, er, stainless. If you want the best fit these, but don’t expect any "concours" prizes, they weren’t used 40 years ago !

Return to index

All Nuts, washers and socket/setscrews are post free for orders of over £3.00. Below £3 add 50p for P & P
	Length	Threading	BZP	Stainless	Common Uses

Hex. Nuts		2BA	£0.10	£0.20	Frame fixings (eg Mudguard eyes)
		Ditto nylok	£0.15	£0.75
		Ditto locknut	£0.15	N/A
		M5	£0.10	£0.15	Frame fixings, more modern frames
		Ditto nylok	£0.15	£0.20
		Ditto locknut	£0.15	£0.20
		3/16"BSF	£0.10	N/A	Pedal rubber spindles
	Track nuts pair	5/16" Front (chrome)	£1.25
	Track nuts pair	3/8" Rear (Chrome)	£1.25

Washers		2BA	£0.05	£0.10
		M5	£0.05	£0.10
		1/4"	£0.05	£0.10	Cotters
		5/16"	£0.05	£0.10	Front Wheel
		3/8"	£0.10	£0.15	Rear Wheel

SETSCREWS hex head	1/2"	2BA	£0.40	£0.50	Frame fittings
	3/4"		£0.40	£0.55
	1"		£0.40	£0.60

SETSCREWS Roundhead	1/2"	2BA	£0.10	£0.30	Frame fittings
	3/4"		£0.10	£0.35
	1"		£0.10	£0.35

SETSCREWS cheese head	1/2"	2BA	£0.10	£0.30	Frame fittings
	3/4"		£0.10	£0.30
	1"		£0.10	£0.35

SOCKET SCREWS Cap head	1/2"	2BA	£0.20	£0.60	Frame fittings
	3/4"		£0.20	£0.35
	1"		£0.20	£0.35

SETSCREWS hex head	10mm	M5	£0.10	£0.12	Frame fittings
	12mm		£0.10	£0.12
	16mm		£0.10	£0.12
	20mm		£0.10	£0.12

SETSCREWS Pan head	10mm	M5	£0.10	£0.12	Frame fittings
	12mm		£0.10	£0.12
	16mm		£0.10	£0.12
	20mm		£0.10	£0.12

SETSCREWS cheese head	10mm	M5	£0.10	£0.12	Frame fittings
	12mm		£0.10	£0.12
	16mm		£0.10	£0.12
	20mm		£0.10	£0.12

SOCKET SCREWS Cap head	10mm	M5	£0.12	£0.20	Frame fittings
	12mm		£0.12	£0.20
	16mm		£0.12	£0.20
	20mm		£0.12	£0.20


SOCKET SCREWS button head	10mm	M5	£0.18	£0.20	Frame fittings
	12mm		£0.18	£0.20
	16mm		£0.20	£0.25
	20mm		£0.20	£0.25



SETSCREWS hex head	10mm	M6	£0.10	£0.15	Seat post binder, canti studs
	12mm		£0.10	£0.15
	16mm		£0.10	£0.15
	20mm		£0.10	£0.15

SOCKET SCREWS Cap head	10mm	M6	£0.15	£0.30	Seat post binder, canti studs
	12mm		£0.15	£0.25
	16mm		£0.15	£0.25
	20mm		N/A	N/A

Return to index

Special Detail Products

Description	Price	UK P & P
Grease nipples for head or BB 1/4" dia, 32 TPI	£2.00	£0.25
Flip-top oilers for BB or Sturmey 1/4" dia threaded 32 TPI	£2.00	£0.25
Metal valve caps for presta valves. Per pair.	ALL GONE!
Reynolds Chain 1/2" x !/8". Much harder to find than 3/32"	£18.00	£1.50
Resilion brake blocks. Yes, I know you can't get them. Front or rear per pair.	ALL GONE!
1/8" chain "slip links". English made, and it says so !	£1.00	£0.25
TDC headsets. "Standard" type. Uses 1/8" balls. All races,nuts, chrome housings etc.	£10.00	£2.00
Sturmey Archer Indicator rods for four-speed hubs (FW,FM,FC,FG).	£4.50	£0.75
Cinelli toe-strap pulls. Plastic, blue or red. Per pair	£1.50	£0.25
Handlebar tape. Traditional cloth type. BLACK. Per roll.	£1.50	£0.25
Handlebar end-plugs. Expander type. Black.	ALL GONE!

Return to index

TAPS AND DIES
		Tap	Die	UK p&p

	2BA	£3.00	£6.00	£0.50	Frame fittings etc
All listed are Carbon steel.	M5	£5.50	£5.50	£0.50	Frame fittings etc
All taps listed are "second cut".	M6	£5.50	£6.50	£0.50	Canti bosses etc.
Please call for High Speed Steel	M3	£5.50	£6.50	£0.50	Campag drop-out adjusters.
Please call for taper and bottoming taps.	9/16 pedal tap	£15.00		£1.25	Double-ended L & R
	5/16 Cycle thread	£5.50	£7.00	£0.50	Front wheel spindle
	3/8 Cycle thread	£5.50	£7.00	£0.50	Rear wheel spindle

Return to index

Tyres

Stock being evaluated

Return to index

CYCLING CLOCKS
These are made to order featuring a large print of classic manufacturers logo. The base clock is made in Britain by Westclox with a specially printed face. Bezel colours are dark blue, green, black, white or burgundy to choice. Clocks can be further personalised with your name etc. at extra cost. Current availability as follows:-
£24.95	Bates	Thanet	F H Scott	James
+ £2.00 P & P	Hetchins	Viking	Mal Rees	VCC
	Holdsworth	H R Morris	Sunbeam	Ariel