Bitz

Here are some miscelaneous photographs of jigs, fixtures, and some parts of the boat made outside the primary sequence.

Here's a closeup of the clamping horns, G-cramps and bits of string. This arrangement is essential in order to stop the embryo boat from destroying itself. There's alot of power in the sheer strakes when they bent around the hull and they're only held on by a few screws until the joint is epoxied.

This one shows - just - the skelton of the daggerboard case. This unit will eventually form part of the keel structure of the boat as well as the cofferdam around the daggerboard.